Skip to main content

How do I change my station type to WebRTC?

Learn how to switch your Five9 station from Softphone to WebRTC when you log in. Every agent on a Mac must switch before March 31, 2027.

TL;DR: Click Launch Dialer and log in. Under Station Type, click WebRTC, paste your Station Number, then click Confirm.

Before you start

  • You use a Mac.

  • You're using Google Chrome. Firefox also works, but we recommend Chrome. Safari isn't supported.

  • Your headset is plugged in.

  • You have your Station Number. It's the same one you use with the Softphone. You can find it in My Profile, and your Owner or Manager can also find it under Settings > Team.

  • If you're on a company network or VPN, ask your IT team to allow Five9 WebRTC traffic. See Five9's technical requirements.

Important: The Five9 Softphone for macOS stops being supported on March 31, 2027. After that date, Mac agents must log in with WebRTC to make and receive calls.

Set up your headset in Chrome

Chrome picks the microphone, and your Mac picks where you hear sound. Set both to your headset before you log in.

Choose your microphone in Chrome

Step 1: In Chrome, click the three dots (⋮) in the top-right corner, then click Settings.

Step 2: Click Privacy and security > Site settings > Microphone.

Step 3: In the dropdown at the top, select your headset.

You can also paste chrome://settings/content/microphone into the address bar to go straight there.

Choose your sound devices on your Mac

Step 1: Open System Settings > Sound.

Step 2: Under Output, select your headset.

Step 3: Under Input, select your microphone.

Important: Your Mac must allow Chrome to use the microphone. Go to System Settings > Privacy & Security > Microphone and turn on Google Chrome. If you change this, quit and reopen Chrome.

Switch your station to WebRTC

Step 1: In Dialer.io, click the headset icon > Launch Dialer.

Step 2: Enter your username and password, then click Log In.

Follow the numbers on the screen below.

Step 3: Under Station Type, click WebRTC.

Step 4: Click the copy icon next to your Station Number at the top.

Step 5: Paste it in the Station Number field.

Step 6: Click Confirm.

Step 7: If your browser asks for microphone access, click Allow.

Note: WebRTC runs in your browser, so there's nothing to install or update on your computer. Keep your browser open while you're on calls. If you refresh the page during a call, the audio drops for a few seconds and then reconnects.

Check that your station works

After you click Confirm, the Station Check screen opens. It shows Softphone Connecting while your station sets up.

Step 1: Wait until it shows Softphone Connected. You may also hear 3 tones.

Step 2: Click Confirm.

Note: The screen says “Softphone Connected” even when you’re using WebRTC. That’s expected.

Tip: If you switch headsets while you’re logged in, click restart your station on the Station Check screen so the change takes effect.

What's next?

If you can't hear audio or your station won't connect, click the blue chat icon (?) in the bottom-left corner of any Dialer.io page to submit a ticket.

Related articles

Did this answer your question?